Full Servo Control Stacker
Key Specifications / Features
Model No.: DNW-DDJ-SV Hits: 17
Full servo control stacker manufacturer in China supplies full servo control stacker, connected with packaging machine, high efficiency & easy operation.
Request a quoteTags
Detail Information
Name: Full Servo Control Stacker.
1) Main Parameter
Stacker Pieces: 30 pieces.
Push Hand: 1 exits or 2 exits.
Stacker Speed: 30 push/min.
Compressor Rate: 70%-80%.
Size: L4.7m x W3.3m x H2.7m.
Weight: 4200KG.
Capacity: almost 19KW.
Electric wire: 3×120mm2+1×50mm2+1×25mm2, 380V/50Hz.
Compressed air: 0.6~0.8Mpa, air consumption ≦ 200LP.
Packing size: L≤400mm, W=200mm-400mm, H=90mm -200mm.
It can be connected with packing machine.
2) Full servo control, with individual control system, the number pieces for single stack can be pre-set on the interface screen as to require. All the movements are achieved by servo motor and high precision cylinders. One or two exit can be considered as to actual speed and stacked numbers.
3) Finish product is twisted by the belt in the side stand position and then covered into the chain paddle, the star and the count single comes from the photocell installed in the in-feed position, the count date is base for the latter actions.
4) Chain is installed in two big wheels, the two wheels are driven by the servo motors. The motor speed is automatic adjusted by in-feed speed, each paddle for each in-fed product. When defects are auto rejected, the chain stops accordingly to prevent incomplete stacks.
5) At stacked numbers reach pre-set quality, two chain wheels move forward and backward on the same direction to keep the stacked part of chain be still to the expulsion system, and the other part of the chain keeps moving to loading the products to next stack.
6) 3-4set of the expulsion plates with cylinder are mounted between two movable chains to push out the complete stack from the paddle chain in turn, when numbers reach pre-set stack quantity, the nearest expulsion plates pushes the stacked number into the array groove, and the next plate is in ready piston.
7) One two -way movement cylinder is mounted on the groove, when stacked products are ready, the cylinder press and push the product to the exit groove at the product direction, then the position at the exit position pushes the pressed product out of the exit groove into the pre-made bag or next auto bagger station. Then the cylinder moves other direction for next stack.
8) If the stack connects with auto bagger, the bagger loading and sealing are completed automatically, if no auto bagger connected, the pre-made bag is extended before the exit and sealed by manual. Once there is one product packaging machine, products pressing, pushing and bag opening operated by packaging machine.
9) When the machine breaks and materail abnormal operation happens, it gave out relatively failure warning tips.
1) Main Parameter
Stacker Pieces: 30 pieces.
Push Hand: 1 exits or 2 exits.
Stacker Speed: 30 push/min.
Compressor Rate: 70%-80%.
Size: L4.7m x W3.3m x H2.7m.
Weight: 4200KG.
Capacity: almost 19KW.
Electric wire: 3×120mm2+1×50mm2+1×25mm2, 380V/50Hz.
Compressed air: 0.6~0.8Mpa, air consumption ≦ 200LP.
Packing size: L≤400mm, W=200mm-400mm, H=90mm -200mm.
It can be connected with packing machine.
2) Full servo control, with individual control system, the number pieces for single stack can be pre-set on the interface screen as to require. All the movements are achieved by servo motor and high precision cylinders. One or two exit can be considered as to actual speed and stacked numbers.
3) Finish product is twisted by the belt in the side stand position and then covered into the chain paddle, the star and the count single comes from the photocell installed in the in-feed position, the count date is base for the latter actions.
4) Chain is installed in two big wheels, the two wheels are driven by the servo motors. The motor speed is automatic adjusted by in-feed speed, each paddle for each in-fed product. When defects are auto rejected, the chain stops accordingly to prevent incomplete stacks.
5) At stacked numbers reach pre-set quality, two chain wheels move forward and backward on the same direction to keep the stacked part of chain be still to the expulsion system, and the other part of the chain keeps moving to loading the products to next stack.
6) 3-4set of the expulsion plates with cylinder are mounted between two movable chains to push out the complete stack from the paddle chain in turn, when numbers reach pre-set stack quantity, the nearest expulsion plates pushes the stacked number into the array groove, and the next plate is in ready piston.
7) One two -way movement cylinder is mounted on the groove, when stacked products are ready, the cylinder press and push the product to the exit groove at the product direction, then the position at the exit position pushes the pressed product out of the exit groove into the pre-made bag or next auto bagger station. Then the cylinder moves other direction for next stack.
8) If the stack connects with auto bagger, the bagger loading and sealing are completed automatically, if no auto bagger connected, the pre-made bag is extended before the exit and sealed by manual. Once there is one product packaging machine, products pressing, pushing and bag opening operated by packaging machine.
9) When the machine breaks and materail abnormal operation happens, it gave out relatively failure warning tips.
Comment Form